Low Gpu Usage Directly Translates To Low Performance Or Low Fps In Games, Because Gpu Is Not Operating At Its Maximum Capacity As It Is Not Fully Utilized.
Bottom fans intake and top fans exhaust. Reverse mode with front mesh kit at fan bracket scenario replace the glass panel to the front mesh kit brings further fresh air into the chassis to cool the cpu and gpu efficiently. Investing in decent case fans can seriously reduce internal temps, especially if they have high cfm (cubic feet per minute) levels.
This Will Give Cool Air Directly To The Intake Fans On The Gpu Itself.
Generally, you need an intake and an exhaust to maintain positive airflow, meaning having more. Lots of youtube videos about people monkeying with them to try to get better cooling / higher flow with mostly poor results as even higher flows don’t actually do much to temps (esp gpu temps as the stock config negative pressure draws cool outside air right across the gpu’s own fans). Low gpu usage in games is one of the most common problems that trouble many gamers worldwide.
If Your Case Doesn’t Allow That Configuration, Have A Front Intake Fan Coupled With Proper Top Or Rear Exhaust Fans, As.
You can go one step further and get numerous intake/exhaust fans to really bolster your cooling. Also, be aware of the other fans in your system that could impact the air flow such as cpu and gpu fans. If you do add intake fans in front there is limited.
Push Or Pull Is Your Preference.
I even added a 2nd set of 3 fans to the side mount radiator so i can keep those at idle almost all the time. Adding an additional pair of intake and exhaust (for a total of four fans). To get the maximum performance out of your graphics card and in games, your gpu usage should be.
Exhaust Fans Behind The Gpu Directly Pull The Heat Out Of The Chamber, Effectively Control The Gpu Temperature.
The chassis comes from the factory with two 140mm fans on the intake and one 120mm. Filtration is provided on every possible intake location, including the top exhaust. I tested all these configs and for overall system performance this works best.